CLT210 is a leakage current tester designed for scientific research. It can quickly and automatically measure samples below 230mm and obtain leakage current information at the edge of the sample. The probe head is made of gold-plated material to ensure high mechanical precision and long service life. The product current test range: 0.1μΩ~110 MΩ can cover most application scenarios and meet the industry's monitoring needs for leakage current in the RCA section. It is the only instrument in the industry that can achieve quantitative and positioning functions for testing leakage current.

The quality of the screen, as a mold for screen printing of solar cells, will directly affect the quality of the cells. The traditional manual observation method has problems such as low efficiency, slow detection speed and low accuracy.
Millennial Auto Visual Tester AVT-4030 integrates four major detection functions into one, which is used to detect the various characteristics of solar cell screens including: size, defects, tension, and film thickness.

RTIS PV-Reflectometer can test the reflectivity intensity of textured silicon wafers to light in different wavelength bands. The test results will be calculated through the software on the photoelectric signal and finally presented in a visual curve to systematically characterize the reflectivity characteristics.
RTIS PV-Reflectometer is suitable for measurement of the reversal rate, lowest wavelength point of reflectivity, total reflected energy within the specified band range of the rough surface of single polycrystalline silicon texturing, coating, etching, MCCE and RIE and other front-end processes.

Process adopts fully digital force, displacement, and speed three closed-loop control, adopts Taiwan AC servo motor and control drive system, cooperates with Italy Haitec gearbox and Taiwan TBI precision ball screw drive to achieve satisfactory transmission efficiency and performance-to-noise ratio.

Mainly used for testing solar photovoltaic modules, adhesive products and other samples: tensile, peeling, tearing and other precision mechanical tests.

Steady State Solar Simulator for Solar Cell uses xenon arc lamps that can simulate the full sunlight spectrum to reproduce the destructive light waves in different environments, which can provide the corresponding environmental simulation and acceleration test for the development and quality control of photovoltaic cells.

Meets the stability test stipulated by MQT09 and MQT19 in IEC61215 standard. The spot area reaches 1200*1000mm (applicable to 20 pieces of 230 cell) and the spectrum meets the BBA standard.

VMM Pro is equipped with a high-resolution camera-based measurement system that enables fast and accurate measurements of a variety of parts.

VMM Pro basic module: used to detect the graphics, 2D plane, grid line width, spacing, printing effect, etc.

Metal coverage module: Making thinner grid electrodes and reducing the shading area to improve the JSC of solar cells is a conventional way to improve cell efficiency. VMM PRO metal coverage is exclusively developed to help photovoltaic enterprise users improve the screen printing process.