Universal Testing Machine-Millennial Solar

Universal Testing Machine<br>ME-CLEE-TTM

Universal Testing Machine
ME-CLEE-TTM

Mainly used for precision mechanical tests such as tensile, peeling and tearing of samples such as solar photovoltaic modules and adhesive products. With the rapid development of the solar photovoltaic industry, this equipment fully meets the test requirements of the mainstream 16-grid, 12-grid, 9-grid, and 6-grid cells in the existing market. It can quickly process data in multiple intervals and segments, and directly generate test reports for different test requirements. , the data stores a single independent data.

SPECIFICATION DOWNLOAD

Content	Specification
Technical Parameters
Maximum test force	Optional within 2kn
Accuracy Class	Level 0.5
Test force test range	0.4%-100% FS (the measurement accuracy is 1% when the measurement range is 0.4%-1%, and the measurement accuracy is 0.5% when the measurement range is 1%-100%, so it is recommended that the sensor use a capacity range of 1%-80%)
Indication relative error	Within ±0.5% of the indicated value
Test force resolution	1/500000, no binning in the whole process, and the resolution remains unchanged throughout the process
Force control speed adjustment range	0.005-5%FS/s；
Deformation measurement range	0.2%-100% FS；
Deformation indication error	Within ±0.5% of the indicated value
Deformation rate adjustment range	0.005-5%FS/s；
Deformation measurement resolution	1/500000, no binning in the whole process, and the resolution remains unchanged throughout the process
Displacement resolution	0.025μm；
Displacement control speed range	0.001-500mm/min
Displacement control speed accuracy	When the speed is less than 0.5mm/min, it is within ±0.5% of the set value; when the speed is ≥0.5mm/min, it is within ±0.2% of the set value
Stress control rate range	0.005-5%FS/s；
Stress control rate accuracy	When the rate is less than 0.05%FS/s, it is within ±0.5% of the set value; when the rate is ≥0.05%FS/s, it is within ±0.2% of the set value
Strain control rate range	0.005-5%FS/s；
Strain control rate accuracy	When the rate is less than 0.05%FS/s, it is within ±1% of the set value; when the rate is ≥0.05%FS/s, it is within ±0.5% of the set value
Effective stretching space	800mm；
Effective test width	370mm；
Test computer	Configure Lenovo dedicated computer
Test software	Switch between Chinese and English
Machine dimensions	About 8054051850mm
Software test function
load displacement curve	Load, time curve; displacement, time curve; stress, strain curve
Accuracy class	Level 0.5
Programmable	Edit the corresponding test standards according to the requirements of each country for the test piece, fill in the test product information, edit the test method, and make it available for future test selection
Data storage	The test results are automatically stored and can be edited as report printouts. With formula editing function, multiple tested curves can be compared
Unit settings	Can set the number of decimal places, each physical quantity unit and password protection, etc.
Auto clear	When the computer receives the command to start the test, the measurement system will be automatically reset
Automatic return	Automatically identify the maximum force of the test, and the movable beam automatically returns to the initial position at high speed
Auto archive	The test data and test conditions are automatically saved to the disk to prevent data loss caused by forgetting to save the disk due to sudden power failure
Test process	The test process, measurement, display and analysis are all completed by the computer
Display method	Data and curves are dynamically displayed along with the test process
Structure reproduction	The test results can be accessed arbitrarily, and the data curve can be re-analyzed
Curve traversal	After the test is completed, the mouse can be used to find out the point-by-point force value and deformation data of the test curve, which is convenient and practical for obtaining test data of various materials
Comparative Results	Multiple test characteristic curves can be superimposed, reproduced, enlarged, and presented in different colors for analysis and comparison of a group of samples
Curve selection	Curves such as stress-strain, force-time, and strength-time can be selected for display and printing as required
Batch test	After one setting of the test with the same parameters, the test of a batch of samples can be completed in sequence
Experiment report	standard format
Limit protection	With program-controlled and mechanical two-level protection
Overload protection	Automatic shutdown when the load exceeds 10% of the rated value
Emergency shutdown	Equipped with an emergency stop switch, which is used to cut off the power of the whole machine in an emergency
Automatic diagnosis	The system has an automatic diagnosis function, regularly checks the measurement system and drive system for overvoltage, overcurrent, overtemperature, etc., and shuts down immediately if abnormal conditions occur.

Related Information

Universal Material Testing Machine - Promoting Innovation in Photovoltaic Module

As a clean and renewable energy form, solar power generation has received more and more attention and application. As the core component of solar power generation systems, photovoltaic modules’ performance and durability are crucial to power generation efficiency and system life. In order to