Impulse Voltage Tester-Millennial Solar

Impulse Voltage Tester
ME-PV-PVTS

In response to the increasingly high requirements of users, Millennial has specially developed Impulse Voltage Tester to simulate the severe weather encountered in nature. This tester designed for outdoor lightning surges uses high-standard electronic components device, and strive to complete the test without problems. Meet the pulse voltage shock test requirements specified in MST14 in the IEC61215-2:2016 standard.

ADVANTAGESSPECIFICATION DOWNLOAD

Features

•Output polarity: positive and negative alternately

•Internal circuitry adjustable for different components

•High voltage real-time monitoring display, when high voltage is out of control, it will automatically enter the protection program and the equipment will stop running

•When the high voltage is abnormal, it will automatically enter the protection program and the equipment will stop running

•By changing the circuit load, the load capacitance can be changed, which is suitable for components with different areas

•Front panel LED indication, 7-inch touch screen display; industrial computer display, communication with oscilloscope, convenient for data recording and storage

Content	Specification
Key indicators	Voltage range: 3KV to 30KV +/-3% Rising edge time: 1.2 μs +/-30 % Falling edge half-life: 50 μs +/-20 % Multi-level adjustment, suitable for different components, capacitive load can rise to 160nF Times: 1-999 Pulse repetition time: 20-9999s Operating temperature range: 5-40°C Operating humidity range: ≤80%, without condensation Power supply: AC220V, 500W
Oscilloscope	Display: 9 inches (color) Number of channels: 2 Real-time sampling frequency: 1.0GSa/S Bandwidth: 70MHZ Peak detection: 3.5ns Highest resolution: ≥5 μs/div @ 4 GSa/s Storage depth: 20M Input impedance: Analog channel: (1 MΩ±2%) \|\| (11.5 pF±2.5 pF) Input sensitivity: 2mV/div～5V/div Maximum input voltage (1MΩ): 300V RMS peak value ≤±450V Time base range: 2 ns/div to 100s/div Time base delay range: -15div～5000 ns Time base accuracy: ≤ ±25 ppm Pulse width range: 20ns to 8s Video polarity: positive polarity, negative polarity Vertical range: ±5div Channel-to-channel isolation: ≥100:1
Voltage divider	Input voltage level: 1kV～40kV Type: Resistive Resistor Temperature coefficient: 100PPm/℃ Response time: ≤100nS Divider ratio: 200:1
Attenuation test line	Attenuation ratio: 10:1 Input impedance: 100MΩ Input capacitance: 12Pf Input voltage: 300V Bandwidth: 100MHZ Bandwidth: 100MHZ
Industrial computer	42U standard chassis 300W power supply 14S4 backplane (with 4PCI slots) ANOVO 7865L CPU long card CORE E2180 4G DDR memory 1T Hard Disk DVD-ROM drive 19" LCD monitor

Related Solutions

IEC61215 Testing Standard

Related Information

IEC61215 Mechanical Stress Test

In the last issue, we introduced the electrical safety test of IEC61215. In this issue, Millennial Solar will introduce to you the mechanical stress test.Terminal strength testPurpose: To determine whether the lead-out and its attachment to the photovoltaic module can withstand the forces exper

IEC61215 Electrical Safety Test

In the last issue, we introduced the performance test of IEC61215. In this issue, Millennial Solar will introduce to you the electrical safety test.Insulation testPurpose: To determine whether the insulation between the current-carrying part of the module and the module frame or exterior is goo

IEC61215

IEC61215 has many test standards. In this issue, Millennial Solar will introduce to you the performance tests among them.Performance TestingPerformance at low irradiance:Purpose: Under standard test conditions and irradiance of 800W·m-2 and solar spectrum irradiance distribution of B level or above